82
Once you select the application, the associated ports will be
displayed.
Set the Ethernet MAC value that you want to filter in
destination side.
Set the IP address value that you want to filter in destination
side.
Set the subnet mask value that you want to filter in
destination side.
Set the port range value that you want to filter in destination
side.
Set the Ethernet MAC value that you want to filter in source
side.
Set the IP address value that you want to filter in source side.
Set the subnet mask value that you want to filter in source
side.
Set the port range value that you want to filter in source side.
Set the protocol ID type that you want to filter.
Set the Vlan value that you want to filter.
Select the IP precedence range.
Select 5 different type of service.
Set the DSCP value that you want to filter.
Set the remarked new 802.1p priority value on the packet that
fulfill every detail setting condition of each rule.
Select the remarking value of IP precedence.
Type of Service
Remarking
Select the remarking value of type of service.
Select the remarking value of DSCP.
Select the remarking value of 802.1p.
Select four types of Queue: Low, Medium, High, Highest.
