Operating instructions
14
b)Setting electronically
(The dishwasher must be switched off)
NOTE: the electronic setting of the water softener is possible ONLY
with the 3 in 1 function deactivated.
The dishwasher is factory set at level 5.
1. Press the On/Off button. All programme selection buttons indicator
lights will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme is set.
The programme must be cancelled: press simultaneously function
buttons 2 and 3 for about 2 seconds, the indicator light of the set
programme starts flashing. After about 2 seconds the indicator
lights of all the programme selection buttons will illuminate,
indicating that the set programme has been cancelled and the
machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of function buttons 1, 2, 3 and 4 start flashing.
3. Press function button 1, the indicator lights of function buttons 2,
3 and 4 turn off while the indicator light of the button 1 goes on
flashing, at the same time the indicator light end of programme
starts to flash.
The current level is indicated by the number of flashes of the
indicator light end of programme (see chart).
Example: 5 flashes = level 5
4. To change the level, press function button 1. Each time the button
is pressed the level changes. (For the selection of the new level see
the chart).
Examples:
if the current level is 5, by pressing function button 1 once,
level 6 is selected.
if the current level is 10, by pressing function button 1 once,
level 1 is selected.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.