
21
I
nstruction book
Fault
Indicator for the selected
programme flashes:
The display shows error
code , 10.
(Problems with the water supply).
Check
Is the water tap turned on?
Is the filter inside the inlet hose blocked?
Is the water inlet hose kinked or nipped?
Are the filters clogged?
Indicator for the selected
programme flashes:
The display shows error
code , 20.
(Problems with water drainage).
Is the spigot blocked?
Is the water drain hose kinked or nipped?
Are the filters clogged?
With help of the error code on the display, it’s possible that you can solve
the problem your self. When the problem is solved, press in the button for
the disrupted programme and the programme continues.
For other error codes on the display ( , followed by a numbers):
• Disrupt the dishwashing cycle.
• Switch the dishwasher off.
• Select the dish programme again.
If the problem occurs again, contact your local service centre, stating the
error code.
Fault
Visible lime deposits or
white film on the dishes.
Check
Whistling sound when
washing.
This is not a fault, try another brand of
detergent.
The dishes are not quite
dry and are not shiny.
Is the rinse aid dispenser empty?
Is the rinse aid dispenser adjusted to too
low dosage?
Have the dishes been left too long inside
the dishwasher?
The door is difficult to
close.
Is the dishwasher level?
Is the salt container empty?
Is the water softener not correctly adjusted?
Is the rinse aid dispenser empty?
Is the rinse aid dispenser adjusted to too
low dosage?