Dil ID: 7
Dil Adı: french
Dil Kodu: fr1tayfun Produits de la Marque AEG Electrolux
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



40
Installation
Water outlet hose connection
The end of the drain hose can be connected in the following ways:
11..
To the sink outlet spigot, securing it to the underside of the work surface.
This will prevent waste water from the sink running into the machine.
22..
To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.
The waste connection must be at a height
of 60 cm (maximum) from the bottom of
the dishwasher.
The drain hose can face either to the right
or left of the dishwasher.
Ensure the hose is not bent or squashed as
this could prevent or slow down the
discharge of water.
The sink plug must not be in place when
the machine is draining as this could cause
the water to syphon back into the machine.
The total length of the drain hose, including
any extension you might add, must be no
longer than 4 metres. and its internal
diameter must be no smaller than the diameter of the hose provided.
Likewise the internal diameter of the couplings used for connections to the
waste outlet must be no smaller than the diameter of the hose provided.
When connecting the drain hose to an under
sink trap spigot,
tthhee eennttiirree ppllaassttiicc mmeemmbbrraannee
((AA)) mmuusstt bbee rreemmoovveedd
. Failure to remove all
the membrane will result in food particles
building up over time eventually blocking
the dishwasher drain hose spigot.
Our appliances are supplied with a security device to protect against the return
of dirty water back into the machine.
If the spigot of your sink has a "no return valve" incorporated this can prevent
the correct draining of your dishwasher. We therefore advise you to remove it.
117987670en_aus.qxp 5/9/2007 5:48 PM Pagina 40