Programme Degree of soil Type of load Programme description
AUTOMATIC
1)
Any Crockery, cutlery,
pots and pans
Prewash
Main wash up to 45°C or 70°C
1 or 2 intermediate rinses
Final rinse
Drying
30 MIN
2)
Normal or light
soil
Crockery and cutlery Main wash up to 60°C
Final rinse
ECO 50°
3)
Normal soil Crockery and cutlery Prewash
Main wash up to 50°C
1 intermediate rinse
Final rinse
Drying
1) During the Automatic programme, the soil level of the dishes is given by how cloudy the water is. The programme
duration and consumptions can change. This depends if the appliance is fully or not and on the level of soil on
the dishes. The appliance adjusts automatically the temperature of the water during the main wash.
2) This is the perfect daily programme to clean a not fully load. Ideal for a family of 4 persons who only want to
load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes. Please refer to separate leaflet supplied, for test data.
Consumption values
Programme Duration (in minutes) Energy (in kWh) Water (in litres)
INTENSIVE CARE
70°
130 - 140 1,3 - 1,5 14 - 15
AUTOMATIC 80 - 125 0,8 - 1,3 10 - 19
30 MIN 30 0,8 8
ECO 50° 160 - 170 0,8 - 0,9 12 - 13
The pressure and temperature of the water, the variations of power supply and the quantity
of dishes can change these values.
Setting and starting a washing programme
Set the washing programme with the door ajar. The washing programme only starts after
you close the door. Until then it is possible to modify the settings.
Do these steps to set and start a washing programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press one of the programme buttons. Refer to the chapter 'Washing programmes'.
– The programme indicator light comes on.
4. Close the door.
– The washing programme starts.
When the washing programme operates, you cannot change the programme. Cancel the
washing programme.
Setting and starting a washing programme
17
