ARISTON DISHWASHER - Instructions for installation and use
17
D
1509)50-4
Detergent and rinse aid
The rinse aid.
This product makes dishes
sparkle more as it improves
their drying. The rinse aid
container is situated on the
inside of the door: It should be
filled up when the low rinse aid
indicator light "U" flashes.
Loading the rinse aid.
To open the dispenser, turn cap
C anticlockwise. Take care
when you pour in the rinse aid
to avoid it overflowing. You can
adapt the amount of rinse aid
used by the dishwasher:
regulate the adjuster F which
you will find under lid C. You
can choose from six different
positions.
The detergent
Loading the detergent
To open lid A, press button B.
The detergent should be
poured into the two containers
C and D up to the rim.
Now you can close the lid: press
it down until you hear it click.
If you prefer to use the
detergent in tablet form, then
place one inside the container
D and close the lid.
It won't close!
Check whether there is any
detergent residue on the edges
of the dispenser. It is due to this
residue that the lid won't close.
Get rid of it and you'll see that
it closes.
Only use specific dishwasher detergents. Pour the detergent into the dispenser
on the inside of the door. Before the wash cycle starts!
Use the right
amount of
detergent: if you use
too much, you will
not get cleaner
dishes, but just more
environmental
pollution.
Keep your
dishwasher
detergent and rinse
aid in a cool, dry
place and away from
children.
Useful tips
Proper dosage of the
rinse aid improves
drying.
If drops of water
remain on the dishes
or spotting occurs,
turn the dosage
adjuster to a higher
setting.
If, on the other hand,
the dishes have white
streaks, then turn the
dosage adjuster down
to a lower setting.
You can choose from six different
positions. It is normally set to 4.
B
D
C
A
F
C
Warning
Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one.
If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the
formation of white streaks on your dishes or on the interior of the appliance.
Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container.
If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no.2.
In any case, please read the manufacturer's instructions on the packet.
If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of
cycles.
To obtain the best results from each washing and drying
cycle, powder detergent, rinse aid liquid and salt should be
used.
