EN
1111
Wash options
! If the selected option is not compatible with the selected
wash cycle, this incompatibility will be signalled by the
flashing of the indicator light and a sound alert
(3 beeps); the option will not be activated.
! If the selected option is not compatible with another
option that has been selected previously, the indicator light
corresponding to the first option selected will flash and
only the second option will be activated; the indicator light
corresponding to the button will remain lit in a constant
manner.
Super Wash
This option offers a high-performance wash due to the
greater quantity of water used in the initial phase of the
cycle, and due to the increased wash cycle duration, is
particularly useful for the removal of stubborn stains.
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the Washer-dryer drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level “Iron”.
Time Saver
If you select this option, the wash cycle duration will be
reduced by up to 50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.
Wash cycles and options
Table of wash cycles
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Icon Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Drying
Detergent and ad-
ditives
Max.
load
(kg)
Cycle
duration
Pre-
wash
Wash
Fabric
softener
Cotton Coloureds: lightly soiled whites and delicate colours. 40° 1400
-
11
Synthetics Resistant 60° 1200
-
5
Whites
60° 1400
-
6
Coloureds
40° 1400
-
6
Darks
30° 800
-
6
Wool Platinum Care: for wool, cashmere, etc. 40° 800
-
2,5
Ultradelicates
30° 0
-
1
Anti Allergy
60° 1400
-
6
Rinse
- 1400
- -
11
Spin and Pump out - 1400
- - - 11
Wash&Dry
30° 1400
-
1
Drying Cottons
- -
- - - 7
Drying Wool
- -
- - - 2,5
Drying Synthetics
- -
- - - 5
Cotton Hygiene Prewash
(Add detergent to the relevant compartment).
90° 1400
11
Cotton Whites (1): heavily soiled whites and resistant colours.
60°
(Max. 90°C)
1400
-
11
(*) The duration of the wash cycles can be checked on the display.
For all Test Institutes:
1)
Test Programmes according to SASO 2885:2018
: set wash cycle with a temperature of 60°C + antifoam.
