English - 24
Operations
Control panel
1 Course Selector Turn the dial to select a course.
2 Display area
Displays information of the current course including the course name,
remaining washing time, and settings.
3 Temp.
Press to change the water temperature for the current course.
Press and hold for 3 seconds to turn on/o the Drum Light.
4 Rinse
Press to change the rinse times for the current course.
You can set the rinse times up to 5.
5 Spin
Press to change the spinning speed for the current course.
• Rinse Hold: The final rinse cycle is suspended so that the laundry
remains in the water. To unload the laundry, run a drain or spin
cycle.
• No Spin: The drum does not spin after the final drain cycle.
6 Options Press to enter the Options screen.
7 Prefer Mode
Press to enter custom options screen. 3 custom options are available
but multiple selection is not allowed.
Press and hold for 3 seconds to enter the Settings screen.
8
Navigation
buttons
Use to navigate through the menus or to adjust the value of the
settings: Temp., Rinse, and Spin.
9 Start/Pause Press to start or stop an operation.
10 Power Press to turn on/o the washing machine.
Untitled-8 24 2015-03-16 10:30:40
