12 English
Installation
Installation
Step-by-step installation
STEP 1 Select a location
Location requirements:
• Solid, level surface without carpeting or ooring that may obstruct ventilation
• Away from direct sunlight
• Adequate room for ventilation and wiring
• The ambient temperature is always higher than the freezing point (0 ˚C)
• Away from a heat source
STEP 2 Level the washing machine
A
See if the washing machine is level by
checking the position of the tub:
1. Slide the washing machine into position.
2. Open the door of the washing machine,
and pour the water into the tub to just
below the pulsator level.
3. If the washing machine is level, the
pulsator (A) is positioned at the center of
the water as shown in the gure.
WA3100M_DC68-03823G-00_EN.indd 12 2017-11-17 4:35:35
