Quick course
The Quick course is good for light or slightly stained laundry.
1. Press the Power button to turn the washer “On”.
2. Press the Course select button.
3. Press the Start/Pause button. The water level is selected automatically.
4. The wash, rinse, and spin cycles follow.
5. To pause a course, press the Start/Pause button again. You can change the course when it
is paused.
6. Close the lid.
Super Clean
Use this course to achieve the cleanest wash.
This course provides you with the optimum in washing performance through the 5-step super
clean system.
1. Press the Power button to turn the washer “On”.
2. Press the Course select button.
3. Press the Start/Pause button. The water level is selected at the mid-level between Mid and
Mid-low.
The water level is selected between Maximum and Mid or at the mid-level between Mid and
Mid-low.
4. Close the lid.
ECO+ course
If you want to wash those frequently used towels or less dirty laundry time. Because washing is
speedy, it is good for light or less stained laundry.
1. Press the Power button to turn the washer “On”.
2. Press the Course select button.
3. Press the Start/Pause button.
4. The wash, rinse, and spin cycles follow.
5. To pause a course, press the Start/Pause button again. You can change the course when it
is paused.
6. Close the lid.
Delay Start
Use this to specify a time for the wash cycle to start, for example, when you need to go out and
are unable to monitor the washer.
1. Press the Power button to turn the washer “On”.
2. Press the Delay Start button once.
You may set the delay end time using the Delay Start button from between 3 to 18 hours.
3. Press the Start/Pause button and add the appropriate amount of detergent into the
detergent drawer.
4. Close the lid.
The wash will finish by the set time.
Add detergent and softener according to the water level and close the lid.
• Detergent must be added into the detergent drawer.
• If detergent is added onto the laundry directly, some clothes may become discolored
because the start has been delayed.
• To cancel a Delay Start, press the
Power button.
