RouteFinder MTASR3 User Guide
MTASR3
68
L3 Select high volume.
Command: M
n
Monitor Speaker Mode
Values:
n
= 0, 1, 2, or 3
Default: 1
Description: M0 Speaker always off.
M1 Speaker on until carrier signal detected.
M2 Speaker always on when modem is off-hook.
M3 Speaker on until carrier is detected, except while dialing.
Command: N
n
Modulation Handshake
Values:
n
= 0 or 1
Default: 1
Description: N0 Modem performs handshake only at communication standard specified by S37 and the
B
command.
N1 Modem begins handshake at communication standard specified by S37 and the
B
command.
During handshake, fallback to a lower speed can occur.
Command: O Return Online to Data Mode
Values: 0, 1, 3
Default: None
Description: O0 Exit online command mode and return to data mode.
O1 Issue a retrain and return to online data mode.
O3 Issue a rate renegotiation and return to data mode.
Command: Q
n
Result Codes Enable/Disable
Values:
n
= 0 or 1
Default: 0
Description: Q0 Enable result codes.
Q1 Disable result codes.
Command: S
r
=
n
Set Register Value
Values:
r
= S-register number;
n
varies
Default: None
Description: Set value of register S
r
to value of
n
, where
n
is entered in decimal format.
Command: S
r
? Read Register Value
Values:
r
= S-register number
Default: None
Description: Read value of register
S
r
and display value in 3-digit decimal form.
Command: V
n
Result Code Format
Values:
n
= 0 or 1
Default: 1
Description: V0 Displays result codes as digits (terse response).
V1 Displays result codes as words (verbose response).
Command: X
n
Result Code Selection
Values:
n
= 0–7
Default: 4
Description: X0 Basic result codes (
e.g., CONNECT
); does not look for dial tone or busy signal.
X1 Extended result codes (
CONNECT 56000 V42bis, CONNECT 33600 V42bis
, etc.); does not look
for dial tone or busy signal.
X2 Extended result codes with
NO DIALTONE
; does not look for busy signal.
X3 Extended result codes with
BUSY
; does not look for dial tone.
X4 Extended result codes with
NO DIALTONE
and
BUSY
.
X5 Extended result codes with
NO DIALTONE
and
BUSY
.
X6 Extended result codes with
NO DIALTONE
and
BUSY
.
X7 Basic result codes with
NO DIALTONE
and
BUSY
.
