Malfunctions
58
Pictogram Meaning Possible cause Remedy
Lower spray arm is
blocked
Spray arm is not correctly
engaged
Correctly engage the spray arm.
Spray arm obstructed by, e.g. a
piece of cutlery
Remove the obstruction.
Spray arm blocked by soiling
Clean the spray arm bearings
( 8.2).
Upper spray arm is
blocked
Spray arm obstructed by, e.g. high
dishes
Remove the obstruction.
Spray arm blocked by soiling
Clean the spray arm bearings
( 8.2).
Filter cylinder
blocked
Heavily contaminated filter cylinder
Remove, clean and replace the
filter cylinder.
Energy optimization
1
On-site energy optimisation
equipment switches individual
electrical consumers (heating
elements).
Wait until the on-site energy
optimisation equipment switches
off.
Pump inlet filter not
fitted
Missing pump inlet filter
The machine switches off
after 30 seconds and will not
be filled.
Fit the pump inlet filter and, if
necessary, switch the machine on
again.
INFO: When the prompt is
downgraded three times, the
machine can be switched on.
Pump inlet filter not
fitted despite three
prompts
Missing pump inlet filter
IMPORTANT: The circulating
pump and drain pump may get
damaged by drawing in, for
example, pieces of cutlery.
Fit pump inlet filter.
Automatic hood
opening
2
defective.
Defective motor
Contact an authorised service
technician for the repair.
Tank will be filled
A wash programme is started
while the machine is refilling
Wait till the machine has been
filled.
Malfunction with
error code
Various
Display the error code ( 9.1) and
assign the repair to an authorised
service technician.
1
is displayed only when the machine is connected to an equipment with energy optimisation
2
Special equipment
