
1-13
1. 5. 4 Operation Panel
The Operation Panel on the upper right of front face is available for several settings. It also
indicates several status of KIP Color 80.
1 2 3 6 4 7 8 9 10 11 5
12 13 14 18 15 16 17
No. Name of part Function Refer to
page;
1 Roll Deck Selection
Indicator
Indicates the present selection of Roll Deck for Initial
Cut.
1-40
2 Roll Deck Selection
Key
Selects one Roll Deck for Initial Cut. 1-40
3 Cut Key Makes an Initial Cut for the roll media on the selected
Roll Deck.
1-40
4 Wire-Clean Key Starts wire cleaning operation to prevent any image
problem. Lights when ready for wire cleaning, flashing
for cleaning, off for disabled for cleaning
1-140
5 Ready Indicator Flashes green when the KIP Color 80 is warming up.
Lights green when the KIP Color 80 gets ready.
1-16
6 Open Indicator Lights orange when any door or unit is open or
unlocked.
1-120
1-131
7 Web Cleaner Empty
Indicator
Flashes red when the Web Cleaner is near empty.
Lights red when the Web Cleaner is emptied completely
and no more copy/print become available.
1-132
8 Toner Empty
Indicator
Lights red when the toner is emptied completely and no
more copy/print become available.
1-30
1-132
9 Roll Empty Indicator Lights red when the roll media in use is emptied. 1-19
1-133
10 Mis-feed Indicator Lights red when a printing media is mis-fed.
(A mis-feed code like “J-xxxx” is indicated on the Status
Display and some indication LED of Mis-feed Location
Indicator lights red to inform the location of mis-feed.)
1-74
1-134
11 Waste Toner Full
Indicator
Lights red when the Waste Toner Box is filled with the
toner or when it is not installed correctly.
1-135
12 Density Indicator Indicates the density level presently selected by the
Copy Density Key.
-
13 Copy Density Key Can change the density level to make the printed image
lighter or darker.
-
1
2 3 4
Paper Deck
K
C
M
Y
MF
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
Wire-C lean
Menu Enter Online
Copy Den sity
Selec t Cut