Administrator Operations
2
C250P 2-61
Administrator Operations Chapter 2
10 Turn OFF and then turn ON the main power switch.
<From PageScope Web Connection>
0 For the procedure to call the Network screen to the display, see steps 1
and 2 of “Changing the auth-password and priv-password” on
page 2-52.
1 Start the PageScope Web Connection and call the Network screen to
the display.
2 Click the [TCP/IP Setting] menu.
3 Select [Manual Setting] from the IP Address Setting Method pull-down
menu.
4 Enter the IP Address in the “IP Address” box.
– If [Auto Setting] is selected from the IP Address Setting Method
pull-down menu in step 3, select the means with which to acquire
the IP Address automatically, including DHCP, BOOTP, ARP/PING,
and AUTOIP setting.
5 Click the [Apply].
6 Click the [OK].
7 Click the [Logout].
c250P_security_E.book 61 ページ ２００７年４月１０日 火曜日 午後７時２７分
