ENWW Switching from wired to wireless 21
Information tab
The Information tab provides quick links to the following information:
● Device status
● Device configuration
● Supplies status
● Event log
● Print Info pages
Settings tab
The Settings tab has links to several pages that allow you to view and change the printer's
configuration.
Note Driver settings can override settings made in the HP toolbox.
● Device Information. View basic information about the printer.
● Paper Handling. View and change the settings for the printer's input tray.
● Printing. View and change the default printer job settings.
● PCL. View and change the PCL font information.
● PostScript. This page is available for the HP LaserJet 1320 series printer only. View and
change the settings for PS errors and timeout.
● Print Quality. View and change the print quality settings.
● Print Modes. View and change the print modes for various media types.
● System Setup. View and change system information.
● I/O. View and change the I/O timeout setting.
● Resets. Change all the printer settings back to the factory default settings.
Network window
When you click the Network link on the Advanced Printer Settings page, a new window opens.
Use this section to configure network settings.
Switching from wired to wireless
If the printer is communicating with a wireless network and you plug a LAN cable into the printer, it
automatically switches to wired communications. You can also disable wired or wireless
communications using the embedded Web server. For more information, see Embedded Web
server.
