• When installing or replacing hardware, HP service providers cannot enable the TPM or the
able these features.
M from the system
.
or disfigures the TPM security
M, administrators should consider
re the integrity of the system data.
e recovery key/password is
compromise of system integrity.
e. For operating instructions, see
encryption technology. For security reasons, only the customer can en
• When returning a system board for service replacement, do not remove the TP
board. When requested, HP Service provides a TPM with the spare system board
• Any attempt to remove an installed TPM from the system board breaks
rivet. Upon locating a broken or disfigured rivet on an installed TP
the system compromised and take appropriate measures to ensu
• When using BitLocker™, always retain the recovery key/password. Th
required to enter Recovery Mode after BitLocker™ detects a possible
• HP is not liable for blocked data access caused by improper TPM us
the encryption technology feature documentation provided by the operating system.
Installing the Trusted Platform Module board
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment,
nt panel Power On/Standby
pply and some
remove the power cord to remove power from the server. The fro
button does not completely shut off system power. Portions of the power su
internal circuitry remain active until AC power is removed.
WARNING: To reduce the risk of personal injury from hot su
internal system components to cool before touching them.
rfaces, allow the drives and the
1. Power down the server (on page 6).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Remove the tower be
o Remove the server from the rack.
3. Place the server on a flat, level work surface.
4. Remove the access panel (on page 6).
5. Locate the TPM connector. For more information, see the label attached to the serv
zel" on page 6).
er access panel.
CAUTION: Any attempt to
the TPM security rive
remove an installed TPM from the system board breaks or disfigures
t. Upon locating a broken or disfigured rivet on an installed TPM,
consider the system compromised and take appropriate measures to administrators should
ensure the integrity of the system data.
Hardware options installation 27
