
Network configuration
|
|
devolo MicroLink dLAN Wireless
|
16
EN
4.2 Configuring the MicroLink dLAN Wireless on the
WLAN network
4.2.1 General notes
When first delivered, the MicroLink dLAN Wireless access point is set to
static IP address '192.168.0.252'. If you are already running a network which
you want to expand using the MicroLink dLAN Wireless, you may have to
change the IP address to that of your existing network. The following are
explanations of the most common network situations:
Scenario 1:
You are already running a local network with a devolo router.
All devolo network devices operate using standard IP addresses within the
range of 192.168.0.1 to 192.168.0.254. If you have not made any changes to
this setting, the MicroLink dLAN Wireless is recognized automatically by the
Wireless LAN
Before
dLAN
(using standard IP addresses within the range of
192.168.0.1 to 192.168.0.254.)
MicroLink dLAN
Ethernet/MicroLink dLAN USB
MicroLink dLAN
Ethernet/MicroLink dLAN USB
e. g. MicroLink ADSL Modem Router and
MicroLink dLAN Ethernet
MicroLink dLAN Ethernet/
MicroLink dLAN USB