VMP SERIES OF PRINTERS USER'S GUIDE
2
Installing the Printer
For information on installing the printer, see the
VMP
Installation Guide
, which is accessible from
www.datamax-oneil.com.
Setting Up the Printer
The printer mounts to a wall or surface with the
optional dashmount bracket assemblies. For installation
instructions, refer to the instruction sheet supplied with
the accessory or go to www.datamax-oneil.com.
1. After mounting the printer, connect the cigarette
lighter adapter cable or power cable to the
connector with the white tag (Figure 1a and 1b).
2. Plug the cigarette lighter adapter or power cable
into your vehicle's cigarette outlet or power source.
3. If required, connect the communications cable to a
host device.
Note: (For US/Canada) Please only use the Datamax-
O’Neil part number 220180-100 power supply with this
product.
Figure 1a
Communications
cable
Figure 1b
Power cable
