BORLA PERFORMANCE INDUSTRIES
701 Arcturus Ave.
Oxnard, Ca. 93033
805-986-8600
TITLE: 2005-2008 Dodge Challenger srt8 &
R/T, Charger srt8 & R/T, Magnum srt8 &
R/T Chrysler 300 srt8 & 300C Long Tube
Header Installation Instructions
PART NO. A-35453 Rev Page 1 of 5
Long Tube Header Installation For
2005-2008 Dodge Challenger SRT-8 & R/T, Charger SRT-8 & R/T, Magnum
SRT-8 & R/T & Chrysler 300 SRT-8 & 300C
Thank you for purchasing a Borla Performance Stainless Steel Long Tube Header System
This Borla Performance Stainless Steel Long Tube Header System (Part number 17250) has been
designed for 2005-2008 Dodge Challenger SRT-8, Charger SRT-8, Magnum SRT-8 and Chrysler 300
SRT-8 each equipped with a 6.1L V-8 engine and an automatic transmission. Borla Performance
Stainless Steel Long Tube Header System (Part number 17252) has been designed for 2005-2008 Dodge
Challenger R/T, Charger R/T, Magnum R/T and Chrysler 300C each equipped with a 5.7L V-8 engine
and an automatic transmission.
FOR RACING USE ONLY. NOT LEGAL FOR USE ON PUBLIC ROADS.
Borla Performance Industries recommends that an exhaust shop or professional after market parts installer, who has all the necessary
equipment, tools and experienced personnel needed for proper installation, should perform the installation of this system. However,
if you decide to perform the installation, we recommend someone should help you. Ensure the installer uses all under car safety
precautions including eye protection.
Please take time to read and understand the following…
By installing your Borla Performance Exhaust System, you indicate that you have read this document and you agree with the terms
stated below.
It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your
Borla Performance Exhaust System
Borla Performance Industries assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper
operation, lack of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturer’s
products and/or systems.
Precision manufactured using high quality austenitic stainless steel; this system is designed to endure years of heavy use.
Installing a Borla Performance Exhaust System on your vehicle will eliminate the restrictive design of the stock exhaust,
allowing your engine to discharge exhaust gas easier. The result is more horsepower and torque, longer engine life, and a
distinctive throaty growl- all this, with easy bolt-on installation. These installation instructions have been written to help you in
the installation of your Borla Performance Exhaust System. Please read it completely before installing your system.
