Using the X.25 PAD Hardware Upgrade
118456-A Rev 02
3
Connecting Cables
Connect the DB-60 plug connector on the breakout box cable to the receptacle
connector on the X.25 PAD adapter module (refer to (Figure 2)
.
Connect the appropriate cables for X.25 services to the DB-25 receptacle
connectors (labeled Port #1 through Port 8) on the ARN breakout box.
Completing Software Configuration
Once you have successfully installed the X.25 PAD hardware, complete the
following software configuration tasks using instructions found in your BayRS
documentation:
For the latest information, be sure to review the Release Notes and Documentation
Changes for your version of BayRS software.
Configuration Task Location of Instructions
Modify the ARN configuration file to add the
X.25 PAD module and enable default X.25
software services.
• Configuring and Managing Routers with
Site Manager
Connect the ARN to the network. Either of the following:
• Installing and Operating BayStack ARN
Routers
• Configuring BayStack Remote Access
Configure X.25 PAD services and breakout
box ISDB port parameters.
Configuring X.25 Services
