8
INSTALLATION
CONNECTING TO A COIN MECHANISM
Connection to a coin mechanism must be carried
out by a qualified electrician.
A special connecting cable is required to con-
nect the machine to a coin mechanism. This can
be ordered as a spare part, art. no. 92 090 95.
1. Remove the 3 screws at the rear of the top
cover. Remove the top cover.
2. Knock out the punching from the bottom of
the rear bracket.
3. Connect the socket of the connect cable as
shown in the pictures 3 and 4.
4. Lead the cable throught the hole in the
bracket.Use the cord restraint to secure the
position of the cable and moisture protection
of the machine.
5. To connect the connecting cable, see the ins-
tructions provided by the supplier of the coin
mechanism and the circuit diagram of the
machince.
1
2
3
4
