ADVANCE ADAPTERS INC. P/N: 50-5803
P.O. Box 247, 4320 Aerotech Center Way New Item: (07/97)
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 12-04-06
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 51-5800 ADAPTER CASTING
2. 1 52-3800 NP435 MAINSHAFT WITH 23 SPLINES (Shortened 1.440")
3. 1 52-5803 COUPLER SHAFT
4. 1 716015 SPECIAL BEARING RETAINER
5. 1 716063 COVER PLATE
6. 1 716289 SEAL SLEEVE (INSTALLED)
7. 1 716308 BEARING
8. 1 716450 SNAP RING (GM#3785205)
9. 1 716456 SNAP RING (T/A#N5000-334)
10. 1 716512 GASKET
11. 1 716564 GASKET
12. 1 716712 SEAL (National #223440)
13. 4 720040 METRIC BOLTS
14. 2 725025 STUD BOLT 1/2"-13 x 1-1/4" LG
15. 2 725029 H.H.C.S. 1/2"-13 x 1-1/4" LG
16. 1 TT001 TOYOTA TRUCK INSTRUCTION MANUAL
FORD NP435 4 SPEED TRANSMISSION TO
TOYOTA 4WD TRUCK 1986-87 (23 SPLINE)
ADVANCE ADAPTERS
IN-HOUSE PROCEDURES
NOTE:
P/N 716289 must be installed and
loctited in place. Use Loctite 680.
Install seal before shipping
Cut main shaft.
