KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-5703
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-16-01
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that
a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at
automotive dealerships and parts stores.
1. 1 51-4000 ADAPTER CASTING (Ref: 711140) (Assembled by AA)
2. 1 52-1200 GM 4WD SHAFT (GM#8641088) (Ref: 711312)
3. 1 52-6201 COUPLER (27 x 23 Splines) (Ref: 711362-23) (Assembled by AA)
4. 1 716062 NYLON BUSHING FOR T350 OUTPUT SHAFT (CUSTOMER MUST INSTALL)
5. 1 716063 COVER PLATE
6. 1 716289 SEAL SLEEVE
7. 1 716308 BEARING (#6209) (Assembled by AA)
8. 1 716450 SNAP RING (GM#378-5205) (Assembled by AA)
9. 1 716456 SNAP RING (T/A# N5000-334) (Assembled by AA)
10. 1 716511 O~RING (GM# 135-8899)
11. 1 716563 GASKET
12. 1 716564 GASKET
13. 1 716712 SEAL (NAT# 223440) (Installed in Casting)
14. 4 720040 8mm x 1.25 x 20mm (Metrics)
15. 4 723723 H.H.C.S. 3/8"-16 x 1-1/2" LONG
16. 1 TT001 TOYOTA TRUCK INSTR. MANUAL
GM TH350 AUTOMATIC TRANS TO
TOYOTA TRUCK 1986-87 (23-SPLINES)
ADVANCE ADAPTERS
IN-HOUSE PROCEDURES
NOTE:
P/N 716289 must be installed and
loctited in place. Use Loctite 680.
Install seal before shipping
