Directional characteristics
Omnidirectional
Principle of operation
Pressure
Cartridge type
24 mm (1 in) condenser with stainless steel diaphragm
Frequency range, ±2 dB
4041-SP: 20 Hz to 20 kHz with 4 to 6 dB soft boost at 8 kHz
4041-S/4041-T2: 10 Hz to 20 kHz with 4 to 6 dB soft boost at 8 kHz
Phase response
Phase matching between any two microphones: ±10° (50 Hz to 20 kHz)
Sensitivity, nominal, ±2 dB at 250 Hz
4041-SP: 70 mV/Pa; -23 dB re. 1 V/Pa
4041-S: 90 mV/Pa; -21 dB re. 1 V/Pa
4041-T2: 85 mV/Pa; -22 dB re. 1 V/Pa
76
Frequency Response
On-axis and diffuse-field responses of 4041.
Polar Pattern
Directional characteristics of the 4041 (normalized).
Specifications for DPA 4041
Equivalent noise level, A-weighted
4041-SP: Typ. 8 dB(A) re. 20 μPa
4041-S: Typ. 7 dB(A) re. 20 μPa
4041-T2: Typ. 9 dB(A) re. 20 μPa
Equivalent noise level, ITU-R BS.468- 4
Max. 19 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
4041-SP: 86 dB; 4041-S: 87 dB; 4041-T2: 85 dB
Total Harmonic Distortion (THD)
<0.5 % up to 120 dB SPL peak
<1 % up to 126 dB SPL peak
Dynamic range
4041-SP: Typ. 118 dB
4041-S: Typ. 119 dB
4041-T2: Typ. 117 dB
Max. SPL, peak before clipping
4041-SP: 134 dB
4041-S/4041-T2: 144 dB
Output impedance
4041-SP: <200 ohm
4041-S/4041-T2: Matches HMA5000 input
Cable drive capability
4041-SP: Up to 100 m (328 ft)
4041-S/4041-T2: From microphone to HMA5000: Up to 20 m (66 ft)
From HMA5000: Up to 300 m (984 ft)
Power supply
4041-SP: 48 V Phantom power
4041-S/4041-T2: 130 V via HMA5000
Connector
4041-S/T2: 7-pin modified XLR-M (High Voltage)
4041-SP: 3-pin XLR-M (Standard P48)
Dimensions
Weight: 190 g (6.7 oz)
Diameter: Capsule: 24 mm (1 in), housing: 19 mm (0.8 in)
Length: 170 mm (6.7 in)
Polarity
The 4041-S/-T2 microphones are inversed in polarity compared to
all other DPA microphones. The polarity can be reversed on the HMA5000
4041-S and 4041-T2: Positively increasing sound pressure produces negative-going voltage at Pin 4.
See Fig. 1 for Pin designation.
4041-SP: Positively increasing sound pressure produces positive going voltage at Pin 2.
See Fig. 2 for Pin designation.
Operating temperature range
-10 to +70 °C (+14 to 158 °F)
