You can cancel or modify the delay time at any moment, before you
press button 9.
Selecting the delay start :
• Select the programme and the required options.
• Select the delay start by pressing button 8.
• Press button 9:
– the appliance starts its hourly countdown.
– the programme will start after the selected delay has expired.
Cancelling the Delay Start after having started the programme:
• Set the appliance to PAUSE by pressing button 9.
•
Press button 8 once. On the display will appear
'.
• Press button 9 again to start the programme.
• The selected delay can be changed only after selecting the
washing programme again.
• The door will be locked throughout the delay time. If you need to
open the door, you must first set the appliance to PAUSE by
pressing button 9 and wait a few minutes before opening the
door. After you have closed the door, press the same button
again.
The Delay Start cannot be selected with the draining programme.
9
Start/Pause Start the programme by pressing the button 9
•To start the selected programme, press the button 9, the correspond-
ing green pilot light stops flashing. The pilot light 10 illuminates to indi-
cate that the appliance starts operating and the door is locked. If you
have chosen a delayed start, the appliance will begin the countdown.
•To interrupt a programme which is running, press the button 9: the
corresponding green pilot light starts flashing. It is possible to change
some options of a running programme before the programme carries
them out.
•To restart the programme from the point at which it was interrupted,
press the button 9.
• After the programme has started the door is locked. If, for any reason,
you need to open the door, set firstly the appliance to PAUSE by
pressing the button 9. After a few minutes it will be possible to open
the door.
If the door remains locked, this means that the appliance is already
heating or that the water level is too high. In any case, do not try to
force the door!
If you cannot open the door but you need to open it you have to switch
the appliance off by turning the selector dial to
. After a few
minutes the door can be opened (pay attention to the water level
and temperature!). After closing the door, it is necessary to select the
programme and options again and to press the button 9.
17
