GB-13
GB
BASIC FUNCTIONS
BASIC FUNCTIONS
GB-12
D I G I T A L T E R R E S T R I A L R E C E I V E R
SMT-T5040
1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following
picture (banner) each time you switch channels:
2. Volume Control
To control the volume level :
Press the VOL+ or VOL- keys to adjust the volume level.
Press the MUTE key to turn to silence mode.
Press the MUTE key again or VOL+ or VOL- keys in order to cancel the mute function.
First you will see the banner described above.
After pressing the i key a second time you will receive detailed program information for
current program can be displayed on another banner, if there is more information.
When this information is more than one page, use the / keys to move up and down pages.
Note : This service depends on service provider.
3. Select Soundtrack
Press the AUDIO key to see the soundtrack list.
Press the / and OK keys to select one.
4. Service List
Press the CH.LIST key while you are viewing a program.
Select the TV or Radio channel list by pressing the / key.
Press the OK key to watch that channel.
Select the channel by pressing the / and press the Green
/ Blue color key for moving up or down pages on the lists.
5. EPG (Electronic Program Guide)
T5040_Eng 04/15/2010 Page 12-13
Note : 1. This service depends on service provider.
2. After receiver recognized the GMT-time from the signal
which takes few seconds, it can display correct EPG
information.
RED key : Red key is used to reserve channel.
GREEN key : Green key is used for searching for genre.
i key : This key is used to watch the program information, if there is more
information than one page. Use the
/ keys to move up and down
pages.
/ key : Use to display the program list by 30
minutes per block.
Select the channel by pressing the / keys and press the OK key to watch this channel.
SMT-T5040
EPG-Electronic Program Guide The electronic program
guide gives you a channel list for the channels.
Press the GUIDE key while you are viewing a program.
This function is displayed on the screen by using only time.
