Appendix
XPS-ProMail System Operations 4-24-14.doc 53
Appendix A – Technical Specifications
XPS-ProMail System
XPS-ProMail Base: 43” W x 35” D x 51” H base only
XPS-ProDry Base: 28” W x 28” D x 48” H with dryer installed
TB-659 Conveyor: 82” W x 26” D x 35” H
(crated for shipping)
XPS-ProFeed Shuttle Base: 300 lbs.
XPS-ProMail Base: 550 lbs.
XPS-ProDry Base: 325 lbs.
TB-659 Conveyor: 275 lbs.
XPS-ProMail Base: 250VAC, 20A, single phase, 4 wire
XPS-ProFeed Shuttle: 120VAC, 20A
(Normally connected to 120V switchable outlet, inside XPS-ProMail Base.)
XPS-ProDry Base: Powered by XPS-ProMail Base.
8,000 Watt Dryer: 240V, 50A, single phase, 3 wire
TB-659 Conveyor: Powered by XPS-ProMail Base
XPS-ProMail 3.0/4.0 Printer
Inkjet, 6 or 8 HP45A Style Cartridges
(Dots Per Inch)
Dots Per Inch Resolution H x V
600 dpi 600 x 600 dpi
450 dpi 300 x 600 dpi
300 dpi 200 x 600 dpi
All TrueType fonts available on PC.
Prints bitmapped graphics, barcodes and logos
Minimum: 3” W x 5” L
Maximum: 15” W x 17” L
20 # Bond up to 3/8” (0.375”)
Standard and Versatile Black, Red, Blue, Green, Yellow,
and HP Bulk-Ink Cartridges
Water based. May require drying assistance for coated
stock
One job counter and one lifetime counter
The information (electrical and physical dimensions, etc.) on the XPS-ProMail System is
presented here for your reference. Specifications are subject to change without notice
.
