70
Appendix B
Explanation:
1. The Compression Algorithm value (Byte 8) is not a valid or supported
value.
2. The (Pel) Data Format value (Byte 9) in the Write Image Control
command is not X'00'.
Alternate Exception Action: None.
Explanation:
1. The Pel Count Scale Factor value on the Write Image Control command
is not a valid or supported value.
2. The Scan Count Scale Factor value on the Write Image Control command
does not equal the Pel Count Scale Factor.
Alternate Exception Action: None.
Explanation: The Font Inline Sequence parameter in a Load Font
Equivalence command is not a valid or supported value.
Alternate Exception Action: None.
Explanation: The Scan Line Direction parameter value on the Write Image
Control command is not a valid or supported value
Alternate Exception Action: None.
Explanation: The Scan Line Sequence Direction value specified on the
Write Image Control command is not plus ninety degrees from the Scan Line
Direction value.
Alternate Exception Action: None.
NOTE: Plus ninety from 270, (X'8700') must be X'0000'.
X'024601' Invalid WIC Source Image Format
X'024701' Invalid WIC Scale Factor Value
X'024702' Invalid LFE Font Inline Sequence
X'024801' Invalid WIC Scan Line Direction
X'024901' Invalid WIC Scan Sequence Direction
