
Programming the water hardness
level
^
Switch the dishwasher off with the
On/Off button K, if it is switched on.
^
Press and hold the programme
selector button X.
^
Switch the dishwasher on using the
On/Off button K, and hold the
programme selector button X in until
the lower right hand programme
indicator lights up.
If this does not happen, start the
procedure again from the beginning.
^ Press the Turbo button twice.
The Turbo indicator will flash briefly
twice at intervals.
The characters "p15" will flash one
after the other in the display.
This means that the water hardness
level has been set at 15 °d - German
scale (2.7 mmol/l) (factory setting).
^
Using the programme selector button
X, select the value which equates to
your water hardness level.
Each press on the button moves you up
a level. When the highest water
hardness value is reached, the setting
starts from the beginning again.
^
Switch the dishwasher off using the
On/Off button K.
°d
German
scale
mmol/l °f
Value
displayed
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-50
51-60
61-70
0.2
0.4
0.5
0.7
0.9
1.1
1.3
1.4
1.6
1.8
2.0
2.2
2.3
2.5
2.7
2.9
3.1
3.2
3.4
3.6
3.8
4.0
4.1
4.3
4.5
4.7
4.9
5.0
5.2
5.4
5.6
5.8
5.9
6.1
6.3
6.5
6.7-9.0
9.2-10.8
11.0-12.6
2
4
5
7
9
11
13
14
16
18
20
22
23
25
27
29
31
32
34
36
38
40
41
43
45
47
49
50
52
54
56
58
59
61
63
65
67-89
91-108
110-126
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
50
60
70
Before using for the first time
21