Programme options
52
If optimise standby is switched on
(see "P
rogramme options, Optimise
standby") the display will go out after
a few minutes, leaving just the
Start
indicat
or flashing slowly.
Press any button to switch the display
back on aga
in for a few minutes.
The time up until the programme starts
will show counting down in the display
in ho
urs for durations above 10 hours,
and in minutes for durations below this.
When the set time is reached, the pro‐
gr
amme selected will start automatical‐
ly. The time remaining will appear in the
display and the indicator light will go
out.
How the Delay start time is shown in
the display:
up to 59 minutes:
e.g. 30 mi
nutes = .
1 hour up to 9 hours 30 minutes:
e.g. 5 hours = .
over 10 hours:
e.g. 15 hours =
Starting a programme before the De‐
lay star
t period has elapsed:
A programme can be started before the
Delay star
t period has elapsed.
Proceed as follows:
Switch the dishwasher off with the
butt
on.
Switch the dishwasher on again with
the butt
on.
Selec
t the programme you want.
Press the Start button.
The programme will begin and the Start
indicat
or light will light up.
