329
uuJump Startingu
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster - terminal.
3. Disconnect the jumper cable from your vehicle's + terminal.
4. Disconnect the other end of the jumper cable from the booster + terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■
What to Do After the Engine Starts
14 CR-V-31T0A6200.book 329 ページ ２０１４年２月１０日 月曜日 午後７時１分
