BEFORE FIRST USE
1.
Press the on/off button to activate the
appliance.
2. The display shows the default lan-
guage: LANGUAGE ENGLISH.
• Press OK /Start to confirm.
• Press one of the menu buttons to set
a different language and then press
OK /Start to confirm.
3. Press Option to close the menu option.
4.
Make sure that the current setting of
the water softener agrees with the wa-
ter hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water hard-
ness in your area.
5.
Fill the salt container.
6.
Fill the rinse aid dispenser.
7.
Open the water tap.
8.
Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do not
load the baskets.
If you use the combi detergent tab-
lets, activate the multitab function.
These tablets contain detergent,
rinse aid and other added agents.
Be sure that these tablets are ap-
plicable to the water hardness in
your area. Refer to the instructions
on the packaging of the products.
ADJUSTING THE WATER
SOFTENER
Hard water contains a high quantity of min-
erals that can cause damage to the appli-
ance and bad washing results. The water
softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. Refer to
the table to adjust the water softener to the
right level. It makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.
You must adjust the water softener
manually and electronically.
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
51 - 70 91 - 125 9.1 - 12.5 64 - 88
2
1)
10
43 - 50 76 - 90 7.6 - 9.0 53 - 63
2
1)
9
37 - 42 65 - 75 6.5 - 7.5 46 - 52
2
1)
8
29 - 36 51 - 64 5.1 - 6.4 36 - 45
2
1)
7
23 - 28 40 - 50 4.0 - 5.0 28 - 35
2
1)
6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2
ENGLISH 73
