Problem Possible cause Possible solution
The quantity of detergent
was too much.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
Dry water drop
stains on glasses
and dishes.
The released quantity of
rinse aid was not sufficient .
Increase the released quantity
of rinse aid.
The quality of the detergent
can be the cause.
Try a different brand of deter-
gent.
The dishes are wet. • The programme had no
drying phase.
• The programme had a low
temperature drying phase.
For better drying results, keep
the door ajar for some mi-
nutes.
The dishes are wet
and matt.
The rinse aid dispenser is
empty.
Make sure that there is rinse
aid in the rinse aid dispenser.
The quality of the rinse aid
can be the cause.
Try a different brand of rinse
aid.
The quality of the combi de-
tergent tablets can be the
cause.
• Try a different brand of
combi detergent tablets.
• Activate the rinse aid dis-
penser and use the rinse
aid together with the combi
detergent tablets.
Activating the rinse aid
dispenser with the multitab
function activated
1.
Press the on/off button to activate the
appliance.
2.
Make sure that the appliance is in set-
ting mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
3. Press and hold buttons (8) and (9) at
the same time until the programme indi-
cators above buttons (8), (9) and (10)
flash.
4. Press button (9) .
• The programme indicators above
buttons (8) and (10) go off.
• The programme indicator above but-
ton (9) continues to flash.
• The display shows the setting of the
rinse aid dispenser.
Off
On
5.
Press button (9) to change the setting.
6.
Deactivate the appliance to confirm.
7. Adjust the released quantity of rinse aid.
8.
Fill the rinse aid dispenser.
TECHNICAL INFORMATION
Dimensions Width / Height / Depth (mm) 596 / 818 - 898 / 575
Electrical connection Refer to the rating plate.
Voltage 220-240 V
Frequency 50 Hz
ENGLISH 79
