Dil ID: 9
Dil Adı: germany
Dil Kodu: de1tayfun Produkte der Marke Electrolux
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
The number of the washing programme
The remaining time to the end of the
washing programme
The end of a washing programme (the
display shows a zero)
The time of the delay start
The alarm codes.
On/off button
Press this button to activate or deactivate
the appliance.
After ten minutes from the end of the wash-
ing programme, the Auto Off function auto-
matically deactivates the appliance. This
helps to decrease energy consumption.
Delay start button
Press this button again and again to delay
the start of the washing programme from 1
to 24 hours.
Multitab button
Press this button to activate or deactivate
the multitab function. Refer to 'Multitab
function'.
Extra-rinse button
This function adds a cold rinse phase to the
washing programme. The programme du-
ration and the water consumption increase.
Activate or deactivate the extra-rinse func-
tion before the start of a washing pro-
gramme. You cannot activate or deactivate
the function while a washing programme
operates.
The extra-rinse function is not available for
all washing programmes. Refer to 'Washing
programmes'.
Sanitize button
This function gives better results for the hy-
giene. During the rinsing phase, the tem-
perature stays at 70 °C for 10 to 14 mi-
nutes.
Activate or deactivate the sanitize function
before the start of a washing programme.
You cannot activate or deactivate the func-
tion while a washing programme operates.
The sanitize function is not available for all
washing programmes. Refer to 'Washing
programmes'.
Half-load button
Use this function when it is necessary to
start a washing programme with a small
load.
The half-load function decreases the pro-
gramme time and the consumption of water
and energy.
When you use this function, put the load in
the two baskets and decrease the deter-
gent quantity.
Activate or deactivate the half-load function
before the start of a washing programme.
You cannot activate or deactivate the func-
tion while a washing programme operates.
The half-load function is not available for all
washing programmes. Refer to 'Washing
programmes'.
Programme button
Press this button again and again to set a
washing programme. Each time you press
the button, the display shows a number
that is related to a washing programme.
Refer to 'Washing programmes'.
Function buttons
With these buttons you can:
Adjust electronically the level of the water
softener. Refer to 'Setting the water soft-
ener'.
Activate and deactivate the rinse aid dis-
penser (only with the multitab function
on). Refer to 'What to do if...'.
Cancel a washing programme in opera-
tion. Refer to 'Setting and starting a
washing programme'.
Setting mode
The appliance must be in setting mode
for these operations:
To set and start a washing programme.
To set and start a delay start.
To adjust electronically the level of the
water softener.
To deactivate or activate the rinse aid
dispenser (only with the multitab function
on).
Activate the appliance. The appliance
is in setting mode when:
The display shows two horizontal status
bars.
The indicator of the programme button is
on.
electrolux 61