Dil ID: 9
Dil Adı: germany
Dil Kodu: de1tayfun Produkte der Marke Electrolux
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
If you use the combi detergent tab-
lets, activate the Multitab option.
5. Set and start the correct programme
for the type of load and the degree of
soil.
7.1 Using the detergent
20
30
M
A
X
1
2
3
4
+
-
A
B
C
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
7.2 Setting and starting a
programme
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
Press the on/off button to activate the ap-
pliance. The appliance is in setting mode
when the display shows 2 horizontal sta-
tus bars. If the control panel does not
show this condition, press Reset.
Starting a programme without
delay start
1. Open the water tap.
2.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
3. Press one of the programme buttons
again and again until the display
shows the number of the programme
you want to start.
The programme number flashes in
the display.
If you want you can set the applica-
ble options.
4. Close the appliance door, the pro-
gramme starts. The programme dura-
tion starts to decrease with steps of 1
minute.
Starting a programme with delay
start
1.
Set the programme.
2.
Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
The delay time flashes in the dis-
play.
The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.
When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
When you cancel the delay start, also the
programme is cancelled.
1. Press Reset. The display shows 2
horizontal status bars.
2. Set the programme again.
ENGLISH 61