27
Middle spray arm
1. Remove the middle spray arm by turning it lateral-
ly.
The two-part spray arm bearing is held together by
a tension spring (B)
2. Clean spray arm nozzles.
3. To re-fit, press the middle spray arm upwards until
you feel it snap into place.
Lower spray arm
1. Undo the fixing screw (C) by turning anti-clock-
wise.
2. Pull the spray arm off the shaft.
3. Clean the spray arm and the fixing screw.
4. Fasten the spray arm with the fixing screw (C) turn-
ing clockwise.
