4. Put the lower spray arm in position and
turn the fixing screw clockwise.
To clean the external surfaces
Clean the external surfaces of the appliance
and control panel with a damp soft cloth.
Only use neutral detergents. Do not use
abrasive products, scouring pads or solvents
(e.g. acetone).
What to do if…
The appliance does not start or stops during
operation.
First try to find a solution to the problem (refer
to the chart). If not, contact the service cen-
tre.
Malfunction Fault code Possible cause Possible solution
The appliance
does not fill with
water.
• The Indicator light of the
programme in progress
flashes.
• The end-of-programme
indicator light flashes one
time.
The water tap is blocked
or is furred with lime-
scale.
Clean the water tap.
The water pressure is
too low.
Contact your local water
authority.
The water tap is closed. Open the water tap.
The filter in the water in-
let hose is blocked.
Clean the filter.
The connection of the
water inlet hose is not
correct.
Make sure that the con-
nection is correct.
The water inlet hose is
damaged.
Make sure that the wa-
ter inlet hose has no
damages.
The appliance
does not drain
the water.
• The Indicator light of the
programme in progress
flashes.
• The end-of-programme
indicator light flashes two
times.
There is a blockage in
the sink spigot.
Clean the sink spigot.
The connection of the
water drain hose is not
correct.
Make sure that the con-
nection is correct.
The water drain hose is
damaged.
Make sure that the wa-
ter drain hose has no
damages.
The anti-flood
device operates.
• The Indicator light of the
programme in progress
flashes.
• The end-of-programme
indicator light flashes
three times.
Close the water tap and
contact the service cen-
tre.
The programme
does not start.
The appliance door is
open.
Close the door correctly.
The mains plug is not
connected in.
Put in the mains plug.
electrolux 37
