12
Activating rinse aid inflow
when 3in1 function is selected
3If the 3in1 function is not selected, the rinse aid
inflow is always activated.
If the 3in1 function is selected due to the use of 3in1
detergent, the rinse aid inflow is deactivated. If the
dishes then do not dry sufficiently, you should re-ac-
tivate the rinse aid inflow (see also section “Using
3in1 detergents”).
1. Press the ON/OFF button.
3 If indicators for the programme buttons are lit,
a dishwashing cycle is activated. The cycle
must be deactivated:
Press function buttons 2 and 3 simultaneously
for approx. 2 seconds.
All additional wash programme button indica-
tors will go out.
2. Press function buttons 2 and 3 simultaneously and
keep them pressed.
The LED indicators for function buttons 1 to 3 will
flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
4. Pressing function button 2 activates and deacti-
vates the rinse aid dispensing function.
5. Once the multi-display is indicating the required
setting, press the ON/OFF button. The setting is
now saved.
0d
Rinse aid inflow deactivated when
3in1 on (factory setting)
1d
Rinse aid inflow activated when 3in1
on
