2. Fill the detergent dispenser (A) with de-
tergent. The marking shows the dosage:
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent.
A
B
3. If you use a washing program with pre-
wash, put more detergent in the prewash
detergent compartment (B).
4. If you use detergent tablets, put the de-
tergent tablet in the detergent dispenser
(A) .
5. Close the lid of the detergent dispenser.
Press the lid until it locks into position.
Different brands of detergent dissolve in
different times. Some detergent tablets
do not have the best cleaning results
during short washing programs. Use
long washing programs when you use
detergent tablets to fully remove the de-
tergent.
Multitab function
The multitab function is for combi detergent
tablets.
These tablets contain agents such as deter-
gent and rinse aid. Some types of tablets can
contain other agents.
For the use of these tablets, refer to the in-
structions from the manufacturer.
The multitab function can be set with any
program.
When you set the multitab function, it stays
on until you deactivate it.
The multitab function automatically stops the
rinse aid operation. The rinse aid indicator
light is deactivated.
The program duration can increase if you use
the multitab function.
Activate or deactivate the multitab func-
tion before the start of a washing pro-
gram.
You cannot activate or deactivate the
multitab function when the program op-
erates. Cancel the washing program,
then set the program again.
To activate the multitab function:
• Press the multitab button. The multitab in-
dicator light comes on.
To deactivate the multitab function:
• Press the multitab button. The multitab in-
dicator light goes off.
To activate/deactivate the rinse aid
dispenser:
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Press and hold function buttons B and C.
– The indicator lights for function buttons
A, B, and C start to flash.
4. Press function button B.
– The indicator lights for function buttons
A and C go off.
– The indicator light for function button B
continues to flash.
5. Press function button B again.
– The Ready indicator light comes on.
6. Switch off the appliance to save the op-
eration.
10 electrolux
