Problem Possible cause Possible solution
The detergent can be the
cause.
Use a different brand of deter-
gent.
The dishes are wet. The washing programme was
without a drying phase or with
a decreased drying phase.
For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on (this
function automatically deacti-
vates the rinse aid dispenser).
Activate the rinse aid dispenser.
HOW TO ACTIVATE THE RINSE AID
DISPENSER
1. Switch off the appliance.
2. Press and hold the start /cancel button.
3. Turn the programme knob counter-
clockwise until the programme marker
agrees with the first available washing
programme on the control panel.
4. Release the start/cancel button.
– The display shows the electronic ad-
justment of the water softener.
5. Turn the programme knob counter-
clockwise until the programme marker
agrees with the second available wash-
ing programme on the control panel.
– The display shows the current set.
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
6. Press the start/cancel button to change
the set.
– The display shows the new adjust-
ment.
7. Turn the programme knob to off posi-
tion to keep the operation.
TECHNICAL DATA
Dimensions Width 596 mm
Height 818-878 mm
Depth 575 mm
Water supply pressure Minimum 0.5 bar (0.05 MPa)
Maximum 8 bar (0.8 MPa)
Water supply
1)
Cold water or hot water maximum 60 °C
Capacity Place settings 12
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of
the appliance door shows the electrical
connection data.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,
photovoltaic panels and aeolian), use a
hot water supply to decrease energy
consumption.
electrolux 33
