22 electrolux daily use
Select and start a washing
programme
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Close the dishwasher’s door.
4. Turn the programme knob until the
programme marker corresponds
with the desired programme (see
"Washing programmes" chart).
● The On/Off indicator light
illuminates.
● The indicator lights of the phases
foreseen for the programme start
flashing.
5. Press the start/cancel button, the
programme starts automatically
and the start/cancel indicator light
illuminates.
● As soon as the programme starts,
the phase indicator lights turn off
except for the indicator light for the
phase in progress which will
remain lit with a static light.
During the running of the
programme, it is not possible to
change the selection made by
turning the programme knob in
correspondence of another
programme or the Off position.
If you want to change the running
programme you must cancel the
selection made (see "Cancel a
washing programme in progress").
The washing programme will begin
only after having pressed the
start/cancel button. Until that
moment it is possible to modify the
selection made.
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress:
● Open the dishwasher door; the
programme will stop. Close the
door; the programme will start from
the point at which it was
interrupted.
117998 95/0en_pdf 4-09-2006 9:35 Pagina 22
