TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Values:
Tray Settings
Purpose:
To specify the paper types and sizes for tray 1 respectively.
Values:
Automatically sets the IP address.
A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the network is set as the IP
address. The subnet mask is set as 255.255.0.0.
Sets the IP address using DHCP.
Sets the IP address using BOOTP.
Sets the IP address using RARP.
Manually sets the IP address.
Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the
range of 0 to 254. 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address.
Manually sets the subnet mask.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
255. 255.255.255.255 cannot be specified as the subnet mask.
Manually sets the gateway address.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address.
After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply
new settings
Press the Restart printer to apply new settings button to apply the changes.
Specifies the type of paper loaded in the tray 1.
Specifies the size of paper loaded in the tray 1.
