
Back to Contents Page
Understanding the Tool Box Menus
Printer Settings Report
Printer Maintenance
Diagnosis
The Tool Box allows you to view or specify the system settings. You can also diagnose the system settings by using the Tool Box.
The Tool Box consists of the Printer Settings Report, Printer Maintenance, and Diagnosis tabs.
Printer Settings Report
The Printer Settings Report tab includes the Printer Information, Menu Settings, Reports, TCP/IP Settings, Tray Settings, Defaults Settings, and Fax
Settings pages.
Printer Information
Purpose:
To display the printer's system information.
Values:
Menu Settings
Purpose:
To display the printer's menu settings.
Values:
NOTE: A Password dialog box appears the first time you try to change settings on ToolBox when Panel Lock is set on the printer. In this case, input
the password that you have already specified, and click OK to apply the settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Displays the service tag number of your printer.
Displays the serial number of your printer.
Displays the type of printing for the printer. Color Laser is displayed normally.
Displays the asset tag number of your printer.
Displays the memory capacity.
Displays the processing speed.
Displays the version of the controller.
Displays the NIC version.
Displays the version of the Machine Control Unit (MCU) firmware.
Displays the speed for color printing.
Printing Speed (Monochrome)
Displays the speed for monochrome printing.
Displays the amount of time before the printer enters the power saver timer mode 1 after it finishes a
job.
Displays the amount of time before the printer enters the power saver timer mode 2 after it finishes a
job.
Displays the amount of time before the printer automatically resets the settings on the operator panel to
the defaults when no additional settings are made.
Displays the volume of the tone that is emitted when the operator panel input is correct. Off indicates
that the tone is disabled.
Displays the volume of the tone that is emitted when the operator panel input is incorrect. Off indicates
that the tone is disabled.
Displays the volume of the tone that is emitted when the printer becomes ready. Off indicates that the
tone is disabled.
Displays the volume of the tone that is emitted when a copy job is complete. Off indicates that the tone
is disabled.
Displays the volume of the tone that is emitted when a job other than copying is complete. Off indicates
that the tone is disabled.
Displays the volume of the tone that is emitted when a job ends abnormally. Off indicates that the tone
is disabled.