Produkte der Marke Dell

Back to Contents Page

 I/O Bracket

Dell™Inspiron™410ServiceManual

Removing the I/O Bracket

Replacing the I/O Bracket



Removing the I/O Bracket



1. Follow the procedures in Before You Begin.



2. Remove the top cover (see Removing the Top Cover).



3. Remove the top bracket (see Removing the Top Bracket).



4. Remove the bottom cover (see Removing the Bottom Cover).



5. Remove the I/O bezel (see Removing the I/O Bezel).



6. Remove the three screws that secure the chassis fan to the I/O bracket.



7. Using a hex nut driver, remove the two hex nut screws that secure the VGA connector to the I/O bracket.



8. Remove the screw that secures the I/O bracket to the chassis.



9. Release the I/O bracket out of the computer cover and lift the I/O bracket out of the computer.

Replacing the I/O Bracket



1. Follow the procedures in Before You Begin.



2. Align and insert the tabs on the bottom of the I/O bracket into the slots on the chassis.



WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

I/O bracket

chassis fan screws (3)

hex nut screws (2)

I/O bracket screw