Produkte der Marke Dell

Back to Contents Page

 Drive Bay

Dell™Inspiron™410ServiceManual

Removing the Drive Bay

Replacing the Drive Bay



Removing the Drive Bay



1. Follow the procedures in Before You Begin.



2. Remove the top cover (see Removing the Top Cover).



3. Remove the top bracket (see Removing the Top Bracket).



4. Remove the optical drive (see Removing the Optical Drive).



5. Remove the screw that secures the power-button bracket to the drive bay.



6. Without pulling hard on the power-button bracket, lift and hold the power-button bracket away from the drive bay.



7. Remove the two screws that secure the drive bay to the chassis.



8. Slide the drive bay towards the back of the computer and lift the drive bay to access the hard-drive cable.



9. Disconnect the hard-drive cable from the connector on the hard drive.



10. Carefully lift the drive bay away from the computer.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

screw

power-button bracket