3. Replace the PCI-Express card(s) (see Replacing the PCI-Express Card(s)).
4. Close the PCI shroud (see Closing the PCI Shroud).
5. Replace the left side-panel (see Replacing the Left Side-Panel).
6. Connect your computer and devices to electrical outlets, and then turn them on.
7. Enter the system setup utility (see System Setup) and restore the settings you recorded in step 1.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
