4. Display shows
ENTER NEW PIN
. Enter the new PIN and
press
SAVE. Display shows
CONFIRM NEW PIN
. Enter your
new PIN again.
5. Press
SAVE. The display shows
SYSTEM PIN CHANGED
.
6. Press to return to standby or
BACK to go one step
back in the menu.
Repeater mode
You can use a repeater to boost the range and reception
of your base. A repeater must be registered with the base
and the repeater function must be set to ON.
The default setting is off.
1. Press
MENU then scroll DOWN to
BASE SETTINGS
and
press
OK. Scroll DOWN to
REPEATER MODE
.
2. Press
OK then LEFT or RIGHT to select
ON
or
OFF
.
3. Press
SAVE to keep the settings displayed.
4. Press to return to standby or
BACK to go one step
back in the menu.
Base settings 53
If you experience any problems, please call the Helpline on
0800 218 2182* or email
[email protected]9283 BT Diverse 6210 UG Iss.3 [1] 19/2/09 15:24 Page 53
