
2) Loosen the screws that fix the control panel. These can be found in
the following positions:-
o On the stainless steel sides of the oven.
o On the base of the control panel (where the ventilation slots are
cut out).
3) IMPORTANT: Support the oven door from the underneath
whilst attempting the next stage.
o Rotate the control panel as shown whilst supporting the
underneath of the oven door.
o Remove the upper pivot pin. IMPORTANT: The upper pivot pin
must be retained, as it will be required when the door is being
reassembled.
o Pull the door away from the oven cavity and gently lean it on
some padded material, to ensure that no damage is caused to
the oven door or door glass.