Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit www.motorola.com/us/support for FAQs and additional product documentation. 22
Band - Use the pull-down menu to choose the 2.4 GHz and 5 GHz bands.
Bandwidth - Use the pull-down menu to choose Narrow-20MHz or Wide-40MHz.
Channel - This option changes the wireless channel that allows a client to access the 2247-N8. Changing the wireless channel can improve
performance if you suspect interference from other devices near your location.
Wireless Protected Setup - This option provides a convenient way to add advanced secure Wi-Fi connections. Wi-Fi certified WPS clients
can connect and learn the security setting of the 2247-N8 using their hardware push button (if supported) or by entering their special PIN
number at the 2247-N8 WPS support page. Non-WPS clients can be added by following the steps in “Adding Devices to the Wireless Net-
work” on page 49.
Follow the steps below to use WPS:
Make sure your wireless clients are running.
Press the WPS push-button on the back of the 2247-N8 to begin the exchange, which may last up to two minutes. Do not power off your
2247-N8 during the exchange. The 2247-N8 will display a success message when the exchange has completed.
Note: not all wireless client devices support WPS. Refer to your client documentation if you are unsure.
