14. Ensure the following settings are correct, and then click "OK" to return to the Filter Action tab of the Edit
Rule Properties screen.
VPN Setting Windows Setting
IKE enabled Negotiate security
AH disabled AH Integrity: <None>
ESP encryption: Enable/3DES ESP Confidentially: 3DES
ESP authentication: Enable/SHA-1 ESP Integrity: SHA1
15. Click the Tunnel Setting tab, and then select The tunnel endpoint is specified by this IP address.
Enter the WAN (Internet) IP address of the IP-2000VPN, as shown below.
AirLive IP-2000VPN User’s Manual
122
